How to buy matching excavator teeth?

Posted on:       View:847

douchi.png

1. Side pin or top pin

SIDE PIN

The pins have a recessed groove at one end to seat the retainer that is inserted into the adapter. There have a recessed area on one side of the nose that retainer is inserted into. Bucket teeth have an integrated centre-ring pin and retainer that looks like this.

TOP PIN

The hole is on the top and is rectangular shape with a square top and rounded bottom. The top end of the tooth tends to have a rounded shape that fits into a concave counterspace on the adapter.

2. Machine size

Once the style is determined, the next step is to confirm the accessory size. Adapters of the correct size should be installed on the bucket for a specific machine size.

3. Pin and retainer size

Measuring pins and holders is the most accurate way to determine the size of an accessory. you can view the list of pins and cages for that size. Check that the pin/retainer size matches the listed size to confirm the part size.

4. Tooth pocket size

If you are still unsure, or want to check the results again, you can measure the internal pocket opening of the worn/other teeth.Measure the height and width of the top/rear opening of the pocket and compare it to the meter in the product list on the website. If you find a matching product, you are looking for the right product.

5.Success